live help

PLX Devices iMFD Sensor Module - Wideband O2 Air Fuel Ratio

PLX Devices iMFD Sensor Module - Wideband O2 Air Fuel Ratio
detailed thumb
Click for Detailed Images
Product Rating
Write A Review
Price: $265.99

Add to cart
Add to wish list

Product Overview

Digital Wideband Air/Fuel Sensor

SM-AFR accurately measures the precise wideband air fuel ratio (AFR) of any internal combustion engine. Up to 32 SM-AFR modules can be daisy chained together in the iMFD system. SM-AFR can also be used as a stand alone unit capable of interfacing with 3rd party hardware. All Sensor Modules are housed in high quality extruded aluminum designed to operate even in the most extreme conditions. In addition, all SM modules offer outstanding digital accuracy, response and resolution which far exceeds that of a standard gauge. Works with gasoline, bio diesel, ethanol, methanol, E85, LPG, and CNG.

Sensor Module Interlocking design

1.Connects to 12V-18V power source.
2.Analog outputs (0-5V linear wideband output, 0-1V narrowband output, ground)
3.Termination jumper. Closed for first SM in daisy chain.
4.Connects to next SM in daisy chain or to first DM
5.Connects to previous SM or unconnected if first SM in daisy chain
6.Connects to O2 Sensor Harness then to Bosch sensor.

Basic Setup


SM-AFR utilizes the latest digital PID and DSP technologies to maximize o2 sensor reaction time and accuracy without compromising overshoot, and slow settling response time. This technology is coupled with advanced self sensor calibration circuitry and sensor soft start to both prolong the life of your oxygen sensor as well as eliminating any user intervention for manual sensor calibration. PLX widebands may be used and installed in your vehicle permanently.


Technical Article: PLX Critical Response Technology


1.Wideband 0-5V analog linear output
2.Narrowband 0-1V analog output Replace your stock narrowband sensor





1.SM-AFR main unit
2.Bosch LSU 4.2 wideband sensor
3.O2 sensor harness 10ft
4.4ft power wire with 2.1mm connector
5.4ft Analog wires and connector with 4 terminals
6.1ft Serial Cable
7.Termination jumper
8.Quick start guide



The DM-5 AFR is an optional standard 52mm gauge designed to display the measured value from the SM-AFR module. More info

Physical Dimensions 2" x 2.875" x 1.125" (52mm x 75mm x 28mm) L x W x H
Technology PLX Critical Response Technology, Fast Response PID
Accuracy < 0.1AFR (Gasoline) Wideband, < 0.2AFR (Gasoline) Narrowband
Measurement Range 10-20AFR, 0.68 lambda - 1.36 lambda
Analog Outputs Wideband Linear 0-5V, Narrowband 0-1V (Driving Current 20mA)
Operating Voltage 8V-18V
Power Consumption 30 Watts (Max), 18 Watts (Typical)
Power Supply Technology High Efficiency Switching
Operating Temperature 0 - 85 Deg C
Sensor One Bosch LSU 4.2
Enclosure Extruded Aluminum

Recommended products list

Customers who bought this product also bought the following products:
Cusco LSD Type RS 1.5, AP1, S2000
Megan Racing Water Temp Gauge
Eibach Pro Kit Lowering Springs - Honda s2000 2000-2007
Powerflex Honda S2000 Rear Lower Shock Mount Bushing
Defi Link Display Unit
Borla 2 1/2" Turbo Center/Offset Universal Muffler
PowerFlex Rear Anti Roll Bar Bushing 25.4mm - S2000 2000-2009
Megan Racing Turbo/Boost Gauge
Competition Clutch Forged Lightweight Steel Flywheel - Honda S2000 2000-2006
Megan Racing SPEC-Ti Titanium Exhaust System - S2000 00-09


There are no reviews available for this product.
Write A Review

Write A Review

Note: Fields marked with a * must be filled in.

Your Name: *
Your Review's Title: *
Your Rating: *
Your Review: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code

Handcrafted with in Detroit by Web Design Pros